Beijer-electronics EPC TA70 AM EN Instrukcja Użytkownika Pobierz pdf (Strona 4)

Safety Precautions

1SafetyPrecautions

Both the installer and the owner and/or operator of the Panel PC must read and

understand this installation manual.

1.1 General

• Read the safety precautions carefully.

• Check the delivery for transportation damage. If damage is found, notify the

supplier as soon as possible.

• Do not use the Panel PC in an environment with high explosive hazards.

• The supplier is not responsible for modiﬁed, altered or reconstructed

equipment.

• Use only parts and accessories manufactured according to speciﬁcations of

the supplier.

• Read the installation and operating instructions carefully before installing,

using or repairing the Panel PC.

• Neverallowﬂuids,metalﬁlingsorwiringdebristoenteranyopeningsinthe

Panel PC. This may cause ﬁre or e lectrical shock.

• Only qualiﬁed personnel may operate the Panel PC.

• Storing the Panel PC where the temperature is lower/higher than

recommended in this manual can cause the LCD display liquid to

congeal/become isotopic.

• The LCD display liquid contains a powerful irritant. In case of skin contact,

wash immediately with plenty of water. In case of eye contact, hold the eye

open,ﬂushwithplentyofwaterandgetmedicalattention.

• Theﬁguresinthismanualservesanillustrativepurpose. Becauseofthemany

variables associated with any particular installation, the supplier cannot

assume responsibility for actual use based on the ﬁgures.

• The supplier neither guarantees th at the Panel PC is suitable for your

particular application, nor assumes responsibility for your product design,

installation or operation.

1.2 DuringInstallation

• The Panel PC is designed for stationary installation on a plane surface, where

the following conditions are fulﬁlled:

– no high explosive risks

– no strong magnetic ﬁelds

– no direct sunlight

– no large, sudden temperature changes

• Install the product according to the accompanying installation in structions.

• Ground the product according to the accompanying installation instructions.

• Only qualiﬁed personnel may install the Panel PC.

• Separate th e high voltage, signal and supply cables.

• Make sure that the voltage and polarity of the power source is correct before

connecting the product to the power outlet.

• Peripheral equipment must be appropriate for the application and location.

BeijerElectronics, MAEN039

1 2 3 4 5 6 7 8 9 ... 21 22

Komentarze do niniejszej Instrukcji

Brak uwag

Beijer-electronics EPC TA70 AM EN Instrukcja Użytkownika Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Panel sterowania Beijer-electronics EPC TA70 AM EN