Beijer-electronics SCOM Protocol EN Instrukcja Użytkownika Pobierz pdf (Strona 106)

Command Reference

106 Beijer Electronics, MAEN975

6.60 LAU_STATUS_IPADR (0x0301)

Current IP Address

Returns the current IP address of the monitor. If a DHCP server is used, this is the

IP address assigned by the DHCP server. If no DHCP server is used, this is the con-

figured static IP address.

Supported since Firmware Version

MT230 Nautic Monitor: 1.0

Command Stream

Response Message (Acknowledge)

Response Message (Negative Acknowledge)

Under normal operation conditions, a device never sends a negative acknowledge in

response to this command.

Maximum Lr for this Command

Example

Read the current IP address of monitor at address 0.7 (group 0, address 7):

According to the data returned by the monitor at address 0.7 (group 0, address 7),

the monitor’s current IP-address is 192.168.4.240:

0 1 2 3 4 5 6 7...8 9

0x07 ADR

0x4C 0x41 0x55 0x02 ICHKH 0x03 0x01 ICHKD

0 1 2 3 4 5 6 7...10 11

0x06 ADR

0x4C 0x41 0x55 0x04 ICHKH Ret ICHKD

Ret

Value: 0...255 each byte

Type: Byte array

Length: 4

Description: IP address, where the first byte is the highest address field

0 1 2 3 4 5 6 7...8 9

0x07 0x07

0x4C 0x41 0x55 0x02 0x0D 0x03 0x01 0xFB

0 1 2 3 4 5 6 7...10 11

0x06 0x07

0x4C 0x41 0x55 0x04 0x0C 0xC0 0xA8 0x04 0xF0 0xA3

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 130 131

Brak uwag

Beijer-electronics SCOM Protocol EN Instrukcja Użytkownika Strona 106