Beijer-electronics SCOM Protocol EN Instrukcja Użytkownika Pobierz pdf (Strona 19)

Command Reference

Beijer Electronics, MAEN975 19

Maximum Lr for this Command

Example 1

Set the backlight level of monitor at address 0.7 (group 0, address 7) to 130 (0x82):

Monitor at address 0.7 (group 0, address 7) has acknowledged the new backlight level

130 (0x82):

Example 2

Send an invalid “BRT” command to the monitor at address 0.7 (group 0, address 7).

The command has two data bytes, but “BRT” accepts only one byte:

Monitor at address 0.7 (group 0, address 7) has not accepted the command. Instead,

it sent a negative acknowledge with the current backlight level 128 (0x80). The

length of the response message exceeds the specified value 9, because of the invalid

data field length:

0 1 2 3 4 5 6 7 8

0x07 0x07

0x42 0x52 0x54 0x01 0x08 0x82 0x7D

0 1 2 3 4 5 6 7 8

0x06 0x07

0x42 0x52 0x54 0x01 0x09 0x82 0x7D

0 1 2 3 4 5 6 7...8 9

0x07 0x07

0x42 0x52 0x54 0x02 0x07 0xFF 0xFF 0x01

0 1 2 3 4 5 6 7...8 9

0x15 0x07

0x42 0x52 0x54 0x02 0xF9 0x80 0x00 0x7F

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 130 131

Brak uwag

Beijer-electronics SCOM Protocol EN Instrukcja Użytkownika Strona 19